How to close the entrance to the booth in winter. Do-it-yourself warming of a dog house and organization of heating

Winter cold can be a real test for a dog. Of course, there are breeds of northern origin (Husky, Malamute) with a good undercoat and thick coat that can withstand -40 degree frosts. Their ancestors - sled dogs, worked in frost and snowstorms, without much harm to health endured swimming in icy water. One need only recall the 1925 expedition to deliver a diphtheria vaccine to the city of Nome in Alaska. But it must be remembered that already at -15 ° C, the dog will need a more high-calorie diet and periodic rest in the warmth.

If a dog that is usually kept outside is taken into the house with the onset of cold weather, it will feel uncomfortable and may rush back to the street, damage furniture, show anxiety and aggression. So it is necessary to equip the dog with a reliable shelter from cold and precipitation, having determined ahead of time what to put the dog in the booth and how to insulate the walls. In some cases, a warm dog house with infrared heating will be a suitable solution.

If we are talking about representatives of decorative breeds, short-haired dogs, then keeping them on the street is contraindicated. So that the dog does not catch a cold on a walk, it must be dressed. Waterproof overalls are worn if it is slush or sleet outside. A multi-layer quilted winter blanket for dogs is good because it leaves paws open without restricting the dog's movement. In stores, you can also find winter boots for dogs and stockings that cover paws to the shoulders. They must be made of non-slip fabric and not squeeze the dog's paws.

Clothes will protect the dog from the cold, and shoes - from the dirt, salt and chemicals that sprinkle the streets in winter. If the dog walks without shoes, then the paw pads must be washed and greased to avoid drying out of the skin and the appearance of cracks. The walk should be interrupted if the dog trembles or shrinks into a ball - these are signs of hypothermia. You can read more about clothes for dogs.

Booth design

A dog that is kept in the yard needs a warm kennel. Such a warm booth for a dog must meet several parameters. In height, it is necessary to focus on the growth of the animal and make a margin of 10 - 15 cm, the depth and width should allow the dog to lie freely, stretching out its paws. It should be borne in mind that the dog in the booth will lie, sit and walk. But too large a kennel will also quickly cool down without external heating.

When deciding how to make a warm booth for a dog, you should decide on the main building materials. A wooden winter booth for a dog will always be preferable to a brick one, including from the point of view of the possibility of warming. In a brick kennel, you will have to make a wooden frame, which will be filled with insulating material. This will reduce the internal area of ​​the booth. Elite options for booths are made like a Russian hut - from logs, the gaps between which are clogged with tow.

Interestingly, a dog booth for the winter can consist of one room or have a kind of vestibule that protects the kennel from drafts. It is separated from the bed by a partition, which is taken out for the summer. The entrance can be curtained for better protection against the ingress of cold air. The folding roof will allow you to quickly carry out cleaning. The roof of the booth is made of thick boards. It is not recommended to upholster it with metal, as the kennel will quickly cool down. The roof may be sloping, but not gable, as in summer many dogs like to climb on top of the booth.

The walls of the booth should not be made from non-grooved boards. In the cold, the boards will dry out and cracks will appear. Plain plywood or lining will not protect the dog from frost. Typically, an insulated dog house consists of a frame, insulation, inner and outer skins. The floor is made of a solid board (3-4 cm thick) without gaps so that the dog's claws do not get stuck. At the entrance, they often make a low threshold. Laz can be upholstered with metal.

Warming materials

Shavings, foam plastic, felt or mineral wool are used as insulating materials.

The litter will have to be replaced regularly, but it is still better than fabric, which the dog can chew on or pull out of the kennel. But sawdust is something that is not worth laying in a dog's booth in winter, because they get into the nose and climb into the eyes, causing inflammation. Prickly dust prevents the dog from properly lying down in the booth.

If the kennel has double plank walls, then shavings or straw are poured into the gaps between them. If the question arises, how to insulate a dog house for the winter, and then return to the summer version, then this is the right solution. But in this case, fleas can overwinter with the dog.

Styrofoam

Felt

You can upholster the booth from the inside with felt. It will also come in handy for a curtain at the entrance, if you place a felt sheet between two strips of tarpaulin. Its sheets are easy to cut, the edges do not need to be processed. Such insulation is not covered with plywood sheets. A tarpaulin can cover the booth from the outside to protect it from rain. It will be difficult for the dog to pluck or chew on it.

Mineral wool

Mineral wool is valued for its durability and good thermal insulation qualities, but it deteriorates when exposed to moisture and shrinks over time. Mineral wool is also insulated with thermal film because the ingress of its particles into Airways dogs are highly discouraged. On top of the film sheathed with boards.

Heating

In areas where frosts are especially severe, it makes sense to install a dog house heating on a wall, roof or in a kennel frame.

Film and panel heaters are common. The film heater in the dog house operates with the help of infrared radiation and is able to provide heating up to 60 ° C. It does not dry out the air, heats the kennel evenly, is equipped with a temperature sensor to stop heating when a certain temperature is reached. The ultra-thin thermal film of the heater is mounted under the skin, and metal panel heaters about 2 cm thick are attached to it from above.

Some models have a thermostat with which you can manually set a comfortable heating level. Many experts consider installing a heater in a kennel unnecessary, explaining that the dog is able to adapt itself to low temperatures by growing an undercoat. In addition, the transition from a well-heated room to the street and back is harmful for the dog. A tambour can protect against this, in which it will be cool, but still not as cold as outside.

It is difficult to determine if a dog is cold in a kennel in winter, as it is a rather resistant and patient animal and is capable of not showing signs of hypothermia for a long time. But dogs usually try to deal with overheating on their own. Many owners want to know why the dog does not sleep in the booth in winter or runs there for a short time. It is quite possible that a short stay in the kennel is enough for the dog. But it is possible that the booth is poorly ventilated, cramped or hot.

You can often see that the dog gnaws at the insulation or drags out the bedding from the booth, sleeps in the fresh air. He can also spend the whole day outside, running and wallowing in the snow. The main condition for maintaining a pet's health in winter is regular nutrition, and the winter diet should be about a quarter of the usual calories, and food should be given more often. The dog should have enough water, for which, in frosts, a bowl or basin is filled with snow.

Very often, a dog is a family guard who lives on the street and serves all year round. There are all sorts of frosts, and even shaggy dog additional heating may be required. How to insulate in the winter with your own hands so that she is not afraid of any cold - we will soon find out!

[ Hide ]

Choosing a heater

Most breeders agree that it is still necessary to insulate your dog's home. Even despite the fact that part of the heat will always leave through the hole in the booth, an insulated house is better. Only some breeds of dogs are not afraid of winter and frost at all, these are northern Huskies, Malamutes and shaggy Caucasians. But if a short-haired guard lives in your house, such as Doberman says, then he must make a warm house.

When choosing a heater for your dog's booth, the main condition is safety and non-toxicity. Remember that the dog's nose is a hypersensitive organ, so he may refuse to enter a house that is insulated, but smells strongly for him.

The most common insulation materials dog house are:

1. Wood shavings or sawdust. The safest and most environmentally friendly material. Sawdust is simply poured into the space between the walls of the booth. The downside is that the wood material is exposed to moisture and settles quickly. Therefore, literally in a year you can observe a situation where your insulation sags significantly.
2. Styrofoam. Ambiguous material for warming a dog house. Someone talks about its harmfulness, someone about safety, but our houses are insulated with it quite actively. Its advantage is that it does not rot and is not afraid of moisture. In any case, when insulating with foam plastic with your own hands, remember that it must be reliably insulated and protected from the paws of the dog. She is unlikely to understand his purpose and can simply scratch.
3. Mineral wool. Also material with questionable safety for dogs. However, its thermal insulation performance is very good. When insulated with mineral wool, just like polystyrene, it must be securely “hidden” in the inter-wall space. Because of this, the thickness of the walls of the booth can turn out to be very large, which is not always good.
4. Penoplex. This is a relatively new thermal insulation material, considered non-toxic, good option protection of the dog house in winter. It is produced in the form of plates of various thicknesses.
5. Felt. It is considered almost ideal for dog house. The walls and the roof of the booth are simply upholstered with felt from the inside. At the same time, the procedure for warming with felt with your own hands will take a minimum of time and will be safe for your pet.
6. Roll heater. It is also quite convenient, and it allows you to make the temperature in the booth higher with a thickness of the heating layer of only a few millimeters.

Warm up!

In addition to the fact that the owner chooses the option of insulation at his discretion, he still has to think about how to cover the manhole, through which the lion's share of the heat escapes. To do this, you need to make a curtain from felt, tarpaulin or other dense protective fabric (even from an old thin rug). The curtain is attached with self-tapping screws and a wooden plank, while it is cut into equal strips so that the dog can go inside the house. Some owners advise making an attached vestibule to the booth with their own hands, so most of the heat can be kept inside the home.

Remember that you need to insulate everything: the floor, walls, roof.

Hay or sawdust can be laid on the floor of the booth; such bedding is regularly changed. Someone lays rags or rugs on the floor, but remember that the animal does not always understand the purpose of the rug and can simply tear it apart. It is better to replace the rug with burlap or coarse cloth stretched over a wooden frame.

In addition, any insulation must be reliably protected with inside booths. To do this, the interior of the booth is sheathed with clapboard, plywood, chipboard and OSB with their own hands.

And how to make the floor of the booth warmer with ordinary hay will tell the video below!

Insulation of a doghouse with felt

Let us consider in more detail the option of how to insulate the house of your four-legged guard with artificial felt.

Tools and materials

1. Roll of artificial felt.
2. Sharp knife.
3. Nails with wide caps.

Step-by-step instruction

Note that do-it-yourself insulation of the booth with felt is the easiest and cheapest option. In addition, felt, as we have already noted, is considered safe for your pet and you can not “hide” it from the dog.

So, in order to insulate the booth with felt, you need:

1. Cut the felt into pieces equal in size to the walls with a sharp clerical knife.
2. Attach pieces of felt to the walls with wide-head nails. You can also upholster the inside of the roof and floor.
3. Felt does not have to be sheathed on top with wood or plywood. By the way, felt protects well from wind and moisture.

Don't forget to put a warm rug on the floor!

Warming with mineral wool

Warming the booth with mineral wool with your own hands is a more time-consuming process than the previous option. However, it should, in theory, provide higher thermal insulation if everything is done correctly.

Tools and materials

1. Mineral wool;
2. Wooden blocks;
3. Knife, nails, stapler;
4. Vapor barrier;
5. Plywood, chipboard or OSB.

Step-by-step instruction

1. First, the roof is removed from the booth, and its walls are closed with a vapor barrier, which is attached with a stapler.
2. Further, a crate of bars is stuffed onto all the walls.
3. With a knife, "mats" of cotton wool are cut to the size of the crate and inserted into it.
4. Next, the cotton wool is again covered with a layer of vapor barrier.
5. This entire “sandwich” is tightly sheathed with wood, plywood, chipboard or OSB from above so that the dog cannot break the insulation structure.

As a result, the walls, insulated with mineral wool, are quite thick. By a similar principle, you can make insulation and foam. A rug on the floor will make your home more comfortable.

Can heaters be used?

A modern booth may well be equipped electric heating and even a heated mat if you can provide a power source. At the same time, no insulation can be compared with constant heating, which also ensures dryness in the dog house.

You can choose the following types of heaters for your pet's booth:

1. Panel heater. It looks like a metal panel 2 cm wide. It is attached to any wall of the booth with self-tapping screws and provides heating up to 45-50 degrees. It is advisable to hide the heater under the inner lining of the booth.
2. Film heater. This type of heating works on the basis of infrared radiation and heats up to 60 degrees. The film heater is very thin, mounted under the skin, and its infrared radiation is as close as possible to the natural radiation of the dog's body. It can be placed under the floor and put a rug on top.

There are craftsmen who can make a heater with their own hands. For example, like this: an ordinary incandescent light bulb is placed in a tin can, as in a lampshade. This lampshade, in turn, is laid in an asbestos-cement pipe. This design should warm up your dog well.

Video "How to insulate a booth for a dog"

Videos from useful tips Find out more about how to keep your pet's kennel warm!

Breeders whose dogs live in a private house on the street often have a question about insulation. And rightly so, because who wants his pet to freeze in the cold? You can learn how to insulate a dog house for the winter from this article.

Choosing a heater

Most dog breeders still recommend warming the home of their pets. Even if part of the heat will always leave through the hole in the booth, insulation is very important. Of all the breeds of animals that exist in the world today, only a few endure severe cold without problems. In particular, it is about Caucasian Shepherds, huskies, huskies and malamutes. However, if you are the owner, for example, of a Doberman or a Rottweiler, then making the insulation of the booth with your own hands is a paramount task.

What you need to consider when choosing a material for insulation is that it is non-toxic and safe. You should always remember that the most sensitive organ of any dog ​​is the nose. Therefore, if the booth after insulation does not smell like it should, the animal may simply refuse to enter it.

As for the material for insulation itself, today the following are most often used for these purposes:

1. Sawdust or wood shavings. As practice shows, this material is the most environmentally friendly and safe for the pet's body. Sawdust should simply be poured into the space between the walls. The main disadvantage of such a material is that the wood itself is quickly exposed in wet weather. In addition, sawdust settles quickly, so after two, or maybe even one cold season, you will notice that the material will simply sag in winter.
2. Styrofoam can also be used as a material for insulation and heating, although judging by the reviews, this material is ambiguous. Some people say it's harmful, others say it's unsafe, although people have used it with success in cladding houses. The main advantage of polystyrene is that it is not afraid of moisture and practically does not rot. But it will make little sense if the booth is without heating. Also, if you decide to insulate it with your own hands, then you need to remember that the material must be securely insulated so that the dog does not scratch it.
3. A good option is mineral wool, but many breeders also argue about the issue of safety. As practice shows, the thermal insulation properties of mineral wool are quite high. As in the case of foam, the material must be protected as reliably as possible from the paws of a pet. But it is important not to overdo it and not make the walls of the dog's dwelling too thick.
4. You can also use penoplex. Penoplex itself is enough new material for warming. It has been proven to be structurally non-toxic, and generally good enough to be sheathed in a doghouse. On sale you can find penoplex of different thicknesses and sizes.
5. As for felt, it is praised by almost all dog breeders and experts, this material is considered one of the best. With it, the walls and roof of the dog house are upholstered. Moreover, if you do it yourself, then this process will not take so much time. In addition, the material is completely safe for the animal.
6. For these purposes, you can also use rolled insulation. It is also quite convenient in terms of installation, but also quite effective.

Insulation guide

It is important for you, as the owner, not only to choose the best material for winter insulation, but also to take into account many other issues. For example, how it will be possible to cover the exit from the dog house so that heat does not leave it. Alternatively, you can hang a thick curtain on the manhole, for example, from tarpaulin or felt. In principle, you can use any dense fabric (even an old rug). This curtain can be installed using self-tapping screws and a regular bar and, of course, it will not need to be cut into two or more parts. This is done so that the pet can easily go inside.

Sometimes breeders make a special additional vestibule with their own hands. This will keep most of the heat inside. If you decide to insulate the dog's home on your own, then remember that not only the walls are insulated, but also the floor, as well as the roof. You can lay the same sawdust or hay on the floor, but this bedding will have to be constantly changed. Dog breeders suggest laying ordinary rags or old rugs, but the dog may simply not understand why you did it and tear it.

Such a rug can be replaced with burlap or coarse fabric, and fixed with a wooden frame. In addition, the insulation material should be reliably protected from the inside of the home. For this purpose, it is quite possible to use ordinary plywood, OSB or lining.

Insulation of a doghouse with felt

If you don’t know how to insulate a dog house with your own hands or how to do it right, then we have prepared step by step instructions. Consider several options and start with felt.

Tools and materials

What will be required:

• the material itself is artificial felt, about a roll;
• scissors or knife;
• nails with large heads.

Warming with mineral wool

You can also make the insulation of the dog house with mineral wool with your own hands. But keep in mind that compared to the previous version, this one is more complex and laborious. However, mineral wool can provide better thermal insulation, especially if you can do it right.

Tools and materials

What you need:

• a roll or several pieces of mineral wool;
• several wooden bars;
• plywood;
• vapor barrier;
• stapler;
• nails.

Some domestic dog breeders may well build heating on their own at home. For example, for this you can use an ordinary incandescent lamp, which is installed in a jar. That is, it turns out a kind of lampshade. The resulting heating device is installed in an asbestos-cement pipe, according to reviews on the network, such a unit can warm the pet well. Of course, with all handmade devices, you must be most careful to prevent possible fire. It is best to think over that the aviary is already warm with the help of a heating system.

Video "The most efficient way to heat a dog house"

How to quickly and efficiently heat your home pet, look at the video (the author of the video is al zh).

The dog should not suffer because the owner made a booth in which it is impossible to live (by dog ​​standards). When making and insulating a booth, it would be nice to look at it from a dog's point of view, or rather, understanding its scent.

At dog kennel must be:

• normal sizes, not cramped, but not too spacious inside;
• normal materials - not irritating, not poisoning and leading to diseases ... A dog's sense of smell is many, many times more acute than a person's.

Insulation of a dog house may be needed in different situations, for example:

• the booth is available, but it is flimsy, ventilated, the dog does not want to be in it - it would be necessary to repair it ...;
• you need to make an insulated booth for a dog with your own hands from scratch;
• you need to order a booth, what to look for;
• make a doghouse as easy and fast as possible, from what is at hand.

Consider these points, but first, the basic principles of warming a dog house.

How should a dog kennel be insulated

The dog wears a heater. And the best - the air in the undercoat creates an effective thermal barrier around her body. Such that a dog can survive the winter without a kennel, if he can find a quiet shelter for himself.

The dog does not like the wind, which can blow air into the coat.
The second danger is water, moisture, which can wet the undercoat ....

Therefore, the priorities for warming are as follows:

• The dog kennel must be windproof. Drafts are not allowed. Sufficient air exchange is provided through the manhole.
• It should be dry inside, precipitation should not fall or be blown inside. It is not acceptable to use materials that can hold a lot of water - wet bedding, for example ...
• The manhole must be protected from direct wind, or at least placed on the leeward side.
• The booth should be placed on stands to prevent flooding, wetting of the body.
• It is better to place the kennel in a slightly shaded place (but not wet), so as not to overheat in the sun. Nearby should be a completely shaded place where the dog could hide from the heat.
• The dog's home must be insulated. There must be a thermal break in the floor. To do this, a continuous layer of effective insulation is installed between the base and the floor covering, preferably from 1 cm thick. A small thermal insulation of the walls and roof is also desirable.

Temperature, insulation thickness

It does not make sense to make a significant warming of the doghouse (to use a large thickness of the insulation), since the energy loss, the temperature inside, will be almost completely determined by air exchange through a non-closable hole.

If the dog requires a higher temperature than usual, then:

• first of all, you need to take care of the curtain on the manhole (sold industrial production);
• apply a slightly more significant thermal insulation - 3.5 - 5 cm of effective insulation.
• provide for heating - it is better not home-made, but a special electric one for the kennel, or a heating pipeline from the heating system of the house with regulation (preferred option).

As a rule, long-haired yard dogs do not require elevated temperature inside the kennel, they winter well in a normally insulated kennel.

Designs can be varied. If possible, you should look at the booths with a covered threshold. They have a greater degree of protection from the wind and the application of moisture and dirt inside the bed.

Dog kennel quickly, cheaply, from improvised materials

A sufficiently insulated dog house can be made from what is usually found in the yard - a few boards, a couple of boxes, pieces of plywood from old furniture, for example.

Foamed polyethylene with a thickness of 3 mm or 6 mm is purchased "for a penny" in any hardware store.

And the work on making the cheapest and most insulated booth, with some skills, can take only a few hours.
So, the dog house quickly ...

The structure is installed on bricks, and in this form it can serve for more than one year, and the yard dog, as a rule, remains very pleased with its windproof warm dwelling. It is important that nails and screws do not stick out inside ...

Thermal insulation of an old dog house

An existing old dog house is not difficult to insulate according to the above principle.

First, it is advisable to clean the old wooden booth, disinfect it, but only with preparations in accordance with the recommendations of the veterinary services, and no others.

Materials for manufacturing

• Plywood of any kind inside the booth cannot be used due to the release of toxic substances, incl. and formaldehyde. But it can be used outside, provided that it is protected from the internal space with a vapor barrier (foamed polyethylene ...), for example.
• Mounting foam is not used - unreliable, quickly destroyed when damp, "suspicious" chem. compound.
• It is also unacceptable to use any "chemistry" in the manufacture of the booth, incl. and adhesives, impregnations ... except for the one recommended by veterinarians.

Making an ordinary warm booth

To make a booth from a wooden beam and a board, you need to cope with the "hammer and nail" to a greater extent than in previous versions.

In the manufacture of a good, well-insulated booth, the principle is the same. On a solid solid base, the frame and interior upholstery are fixed. Then the insulation is laid and the outer trim is upholstered on top. The roof should be sloping, possibly gable.

An example of a design (very simple) with dimensions is shown in the figure. The thickness of the beams must be selected according to the thickness of the insulation, so that it is tightly pressed against the sealant on the inner upholstery and there would be no air blowing in this place. It is advisable to tighten the insulation to the interior trim with screws and washers.

Each owner should know how to provide comfortable living conditions for the pet. When the cold season sets in, dog owners have a question about how to insulate a dog house for the winter, and whether there is a need for such an event.

Do I need to insulate a dog house?

Dogs different breeds tolerate differently low temperatures, but most of them cope well with the cold and are not even averse to sleeping in the snow. This is especially true for dogs of hunting breeds, since they are distinguished by dense and thick hair. But in order to understand whether a dog freezes in winter or not, taking into account only its breed is not enough. Dogs of the same breed tolerate cold differently, as they are grown and live in different conditions. Even the most cold-resistant animal, which was bred in an apartment or a warm house, will not be able to normally survive the winter on the street.

In the conditions of the Russian winter, the dog needs warm booth

The dog's body adapts to the conditions environment, which affects the condition and quality of wool. The dogs kept in the apartment do not have an undercoat, since they do not need it. If such a dog is allowed outside, especially in winter, it will be cold.

It is important! Of course, if you transfer the dog to outdoor living in a booth, then over time the undercoat will grow back and the normal condition of the coat will be restored. You also need to pay attention to the size of the pet. Dogs large breeds do not lose heat so quickly, unlike small ones. If the dog has short hair or no undercoat, it is unacceptable to keep it on the street without a warm booth.

It is worth paying attention to the temperature that is set in the booth in the winter. If the dog house is made of wood (the most common material), then the temperature in the dog house will differ by a maximum of 3-4 degrees from the ambient temperature. This is due to the fact that air circulates freely through the outlet and does not allow heat to linger inside the dog house. Many owners hang a curtain on the outlet for the winter, however, this is not enough to create full and comfortable conditions for the dog in the winter.

What is the best way to insulate

A worthy owner will somehow carry out warming measures, because no one (except the dog itself) can definitely say whether the animal is cold in winter or not. In order to surely create good conditions in which the dog will endure the winter cold and not endanger his health, you need to choose materials for warming the booth.

Mineral wool

Mineral wool is the most popular material used for insulation. To use it for sheathing a kennel, you need to take into account many nuances. The dog at any time can gnaw or tear with its claws the insulation material, and it will lose its properties. Given the structure of the mineral wool, if the material enters the animal's stomach ( digestive system), then this is fraught with big health problems for the pet. Given the small dimensions of the kennel, work on insulation with mineral wool will become very time consuming. If you want to carry out insulation with this particular material, it is worth considering that glass wool cannot be used, a mandatory measure is the waterproofing of the material and the cladding (regardless of whether the decoration is carried out inside or outside the kennel).

Mineral wool is often used to insulate dog kennels.

Styrofoam

A good option with which it is easy to insulate the booth. The thermal insulation characteristics of foam are the same as those of mineral wool, and even better. There is no need to carry out waterproofing, since the foam is resistant to environmental factors. It is better to choose foam or polystyrene foam for insulation of the booth. Considering that in any case the dog will try to scratch or gnaw at the heat-insulating material, facing works are also indispensable.

Styrofoam - an excellent and inexpensive insulation

Roll heat insulators

Of the most popular, polyethylene and penofol are distinguished. They are easy to fix outside the booth using a stapler. The material has good thermal insulation properties. As in the previous cases, sheathing is required.

Felt

The material is completely natural, which means it is safe for the animal. Its price is available to anyone. Ideal option for warming the booth. Considering that he has good level vapor permeability, prevents the accumulation of moisture in the booth, waterproofing measures are not required. Using felt, there is no need to resort to cladding, it is enough to fix the material with nails.

Felt can be used to insulate a dog house both inside and out.

It is important! If felt is chosen for warming the booth, then it is recommended to purchase fasteners (nails) with large hats. This will ensure reliable and durable fixation of materials on the kennel.

How to make a warm booth with your own hands

• If the kennel is made of wood, it is first of all recommended to treat it with a protective compound (antiseptic) that is safe for the health of the animal.
• For high-quality insulation, it is recommended to disassemble the structure in parts, check each element for cracks and, if necessary, eliminate them. A good material for this is construction foam.
• Laying thermal insulation material on the floor.
• Finished flooring.
• Attaching the selected material for warming the dog kennel to the walls, if necessary, waterproofing the walls and lining.
• The last is roof insulation measures.

In addition to the option of creating comfortable conditions for the dog for the winter, indicated above, it is possible to use some types of heaters. Each of them is described in more detail below.

Curtain installation

The shutter on the outlet is installed according to the following sequence of actions:

1. Initially, at least 2 rectangular fabric elements are cut out. The dimensions depend on the parameters of the inlet. Add 5 cm to the length of each segment, add a distance to the width for attaching elements with an overlap.
2. The material is fastened from the inside of the booth; this can be done directly on the structure or on a pre-prepared and attached rail.
3. For a more reliable attachment, you can use the option of installing a curtain outside the kennel, but at the same time additionally build a frame around the perimeter of the outlet and fix it over the curtain.
4. For fastening, use self-tapping screws or nails with wide hats.

To weight the curtain, it is better to use a two-layer soft tissue by sewing it on the bottom. Choose a curtain material that will prevent heat loss from the kennel. Silicone blinds, an old warm blanket, felt are suitable for this purpose.

Step-by-step instructions for warming

1. Initially, the booth is turned over, they begin to process the floor with special compounds and attach the roofing material.
2. The structure is turned back and the waterproofing material is attached inside the kennel. You can use the same roofing material.
3. The material should be overlapped to prevent gaps. At the joints, it is required to fix the roofing material with a mounting stapler.
4. Next, lay the insulation material. Given that in the future it will need to be covered with a finishing floor, it is recommended to use bars for attachment and build miniature logs from them.
5. Start laying the finished floor. For these purposes, processed boards, plywood or OSB are used.
6. The next step is wall insulation. The process depends on the material chosen, and before starting work, you need to read the manufacturer's instructions. But the principle of building a heat-insulating layer in a dog house is identical, regardless of the material.
7. First of all, they begin to clean and process the walls, if necessary, attach waterproofing materials, after which the thermal insulation is directly laid.
8. Depending on the requirements of the insulating material, they begin to finish the walls. For this, you can use, as for the floor, plywood, boards or OSB.
9. The last step is roof insulation. The work is carried out by analogy with the previous stages. If the roof of the kennel is designed in such a way that the dog does not have access to it, then lining is not required.

Video: do-it-yourself warm booth for a dog

Heating Options

There are several types of heaters that can be used in the booth.

Panel

The device, which is designed to heat the dog kennel, is small in size and is designed in a metal case. The installation is simple. The maximum temperature limit is 50 degrees. You can install the heater on the roof or walls of the booth. The positive characteristics of the device are its silent operation, minimal power consumption, no need for maintenance, during operation, it does not consume oxygen.

You can make a panel heater for a doghouse yourself

Film

The thinnest infrared heaters. Available in rolls and flexible. For the animal, they are completely safe and do not consume much energy. Additionally provide positive impact on the dog's immune system. You can install them in any comfortable spot in a kennel.

Warm floor

The contour design of the warm floor is easily made independently. To do this, you will need to use heating wires that need to be laid on plywood or chipboard and attached to the main structure. You can buy ready-made underfloor heating.

There is another option suitable for creating heat in a dog kennel - a convector heater. When choosing a device, it is important to familiarize yourself with the technical characteristics and pay attention to safety and heating temperature. And it is best to use a convector mat in such a situation. The advantages of the equipment are that the device does not heat up to high temperatures, so it is completely safe for the animal.

Option for connecting a heater to a pet kennel

It is important! If you want to build a heater for a dog house, you need to make sure that it is completely safe for the animal, does not create a risk of fire and does not heat up too much. Maximum temperature for appliances - 50 degrees.

There are many options on how to insulate a dog house for the winter. After reviewing in detail with each of them, you can choose the most suitable for both the animal and its owner. The type of heating depends on the pet and on environmental conditions.