How to make paper flowers. Creative work with hands

Paper flowers will greatly decorate your interior and bring aesthetics and comfort to your living space. For everyone who wanted to learn how to make paper flowers with their own hands, we will show a few simple tutorials. step by step photo for beginners will demonstrate the whole process in detail, and our tips will help you get the job done quickly and without too much fuss. From our article you will learn how to make a paper tulip, how make voluminous flowers for decorating the interior, how to cut a rose from colored paper and much more.

To cut out all this flower-paper variety, we have selected for you beautiful schemes and templates so that you can complete this task easily and quickly.

Paper flowers have a number of advantages that you will not find in living plants. Firstly, they do not fade, do not require special care and do not cause allergies. With the help of multi-colored paper flowers, you can advantageous to decorate the interior or clothing, volumetric flowers are attached to the wall or on the door, they are placed in large vases and solemnly presented for the holidays. , you can find out in one of our previous articles.

But to make your first paper flowers with your own hands, schemes, templates can be printed on a printer. And then - glue the petals according to the proposed instructions.
Do you dream of being presented with a scarlet flower? Make it yourself! Cut out several templates of different sizes and glue the petals on a special sponge located in the middle of the flower.

And for this purple flower you will need:

white sheet of paper;
watercolor paints;
scissors or stationery knife;
aluminum wire;
Cork tree;
paper tape;
green tape or floral tape.

Cut a sheet of paper into even strips, not reaching the edge of the sheet.
Fold the cut leaf into a flower shape.
Make sheets of paper and fold as in the photo.
Connect the flower with the leaves and secure with tape.
Fasten a small piece of cork to the wire and twist it in half.
Insert the wire into the middle of the flower instead of the stem.
Wrap the stem with tape and then tape.
A delicate purple flower is ready.

For a stock, for example, March 8th or May 9th, you can make several origami tulips according to the scheme shown in the photo.

If you have a special stencil, you can make a whole bouquet of scarlet roses and give them to a loved one. detailed instructions for making flowers just present in the photo. If there is no stencil, draw the flowers yourself on a sheet of A4 paper yourself.

For other decorative experiments, we offer you a selection of videos for children and adults with detailed instructions on how to make crafts in the form of flowers.

Paper cut flower templates

And in this part of our conversation, we will introduce you paper cut flower templates. The shapes and sizes of flowers for every taste - from the most delicate color of an apple tree to bright blue cornflower and fiery red poppy.

A few more templates will diversify your flower gallery.

Large paper flowers for decorating the hall with your own hands: templates and schemes

Paper flowers are a win-win option for decorating any room.

Note the short but very detailed master class for the production of volumetric paper flowers. Application from such a "pink heart" decorate the gift box or a greeting card.

Crepe paper flowers are the most beautiful trend of this season. Such giant paper roses can be formed into a chic bouquet, or you can decorate the hall of a restaurant, cafe or your own apartment with them.

It is not difficult to make a flower with your own hands out of paper, especially if you have instruction and manufacturing scheme. Beautiful roses can be made from simple paper templates.

Popular flowers such as carnations can be easy to make from a regular napkin. These delicate flowers will certainly not wither soon.

Scrapbooking is another popular form of creativity for both children and adults. From special colored paper cut simple flowers for cute bouquets or decor.

Easy scrapbooking ideas - try cutting out roses, leaves and petals from special sheets of paper. And then glue everything on a postcard along with bows and decorative ornaments.

Making flowers can get you so engrossed that you don't notice how you transfer your hobbies to other materials, such as fabric. Such cute flowers can make unusual garland or delicate flower basket.

A number of people are skeptical about artificial flowers, based on the fact that real flowers are more beautiful and more fragrant. However, a variety of techniques and types of paper allow even amateurs to create unique masterpieces. Miniature paper flowers are suitable for decorating a postcard, gift box or table setting, large ones for marking accents at festive events. From flowers on stems create bouquets for loved ones, relatives. To give the gift an official note, they arrange them in baskets, create candy bouquets. Below are simple instructions for making paper flowers for different occasions.

The twisting technique consists in winding a strip of paper around a wooden stick. Despite the simplicity of the process, there is a large number of colors created in this technique, not similar to each other. They differ in brightness and originality.

1. Carnation by February 23 or May 9

An easy craft that older preschoolers can handle.

For its manufacture, you will need red, green corrugated paper, a stem stick. Consider the sequence of actions:

The process takes no more than 30 minutes, and when making a flower again, it will take even less time.

2. Asters by March 8

A nice gift for mom, grandmother, girlfriend will be a bouquet of paper flowers. The craft is designed for children over 6 years old. Prepare thick two-color paper, a ruler, a pencil, scissors, narrow tape or glue, a stem stick and green tape. Instructions for creating a bouquet of asters:

a strip 6 cm wide is cut off along the long side of the A4 sheet. A line is marked on it, stepping back from the edge 1.5 cm;
teeth are cut out on the opposite side of the outlined edge;
cut a narrow fringe in the direction from the edge with teeth to the line;
take a stick, begin to wind a strip around it;
the edge of the bud is fixed with glue. For reliability, they are wrapped with transparent tape on top;
bend the petals to the sides;
take a wooden stick, wrap it with green tape;
plant a flower on a stalk;

Fix the core with plasticine.

More patient lovers first make the middle of the flower. To do this, twist a narrow strip of contrasting flowers with petals. Fix, wind a strip with a fringe on it. Such a flower has a more elegant, finished look.

As a result of experiments with the width of the fringe, with the tips of the petals (they make the edge not with teeth, but with a rounding or otherwise), chrysanthemums, daisies, peonies are obtained.
If in blanks made of thick paper (for example, in an aster) the tips of the petals are twisted with a wooden stick, then the resemblance to fresh flowers will increase.

Original paper flowers using the twisting technique are made from fringe strips, which differ in the length of the petals. For example, do the middle. To do this, a strip 1 cm wide is tightly wound around a toothpick. The next strip with a fringe, but 2 cm wide, is wound on it. Then, 2.5 and 3 cm wide. A flower is obtained in which the length of the petals gradually increases from the center to the edges.

3. Paper rose

A spectacular rose is rolled out of paper in a matter of minutes. To do this, you need a colored square sheet of paper (preferably not glossy, so that it is more convenient to work with). A spiral is drawn on it (do not worry about the evenness of the intervals), cut it out. They begin to twist the rose from the edge (not from the middle). Form a bud, fix.

How to make paper puff flowers

Spectacular "puffs" are obtained by superimposing the silhouettes of flowers on top of each other. Each layer differs in size from the previous one, it is given a relief (more on this below), which allows you to add volume to the finished product. To create puff flowers, prepare stencils:

selected on the Internet;
create themselves. On a sheet of A4 format, circles of different diameters are circled, cut out. Each circle is folded four times, then in half. Draw on the outer edge of the top of two petals (heart). Cut out the edge, deepen the center of the workpiece. Unfold. The layer is ready.

1. Volumetric puff flower.

In order to make a three-dimensional decoration, you will need: colored paper blanks, scissors, a tool for embossing, thread, needle, glue. Instruction:

The edges of the petals are tinted with a contrasting felt-tip pen.

Different silhouettes of petals and their unusual relief allow you to create dahlias, poppies, asters, roses and anemones.
Irises, pansies are made in this technique (templates are downloaded on the Internet).

2. Corrugated paper puff

Flowers made of paper (crepe, corrugated) look natural, as the paper already has a certain relief. In addition, the delicate structure of the material allows you to create exquisite compositions for interiors and decorations for special occasions. Consider fast way flower creation:

select crepe paper of the desired color. To give more naturalness, two colors close in tone are taken;
fold the sheet in half the required number of times, get a square blank;
fold it three times, draw the edge of the petal;
cut out, unfold the workpiece.

Sew the layers in the middle with a dense thread, fluff the flower.

The method is suitable for making daffodils, carnations. It is only required to cut the edges of the blanks in an appropriate way, to choose the right color shades.

How to get flowers by folding

Let's look at two techniques that help to get paper flowers by folding it.

1. Tulips

The proposed option, carried out in the origami technique, is within the power of younger students.
You will need double-sided colored paper, a tube, plasticine. Instruction:

a square is made from an A4 sheet;
cut off the extra rectangle;
the square is folded so as to get two diagonals;
push in side elements;
wrap up two front corners;
turn the workpiece over, repeat the previous step;
bend the outer corners to the middle, repeat on the other side;
the lower corner is folded, carefully ironed;
pull out (blow out) the base of the tulip;
turn away the petals;
fill the lower edges of the petals into each other;
take a tube, incise from one edge to a depth of 2 cm, unscrew the sections.

Attach the bud to the tube. Tulip is ready.

2. Roses

You will need thick paper, as the paper strip will twist around itself during the folding process. This technique does not have to be carried out strictly in accordance with the proposed scheme. It is important to understand the idea of paper folding.

How to make pom pom flowers

Craft a large flower from corrugated paper can be done in the following way:

For the middle, a contrasting ball of corrugated paper is used.
Anemones, peonies, carnations are made in a similar way, while changing the edges with scissors.

How to make flowers with rounded petals

With the help of small hard balls, wide short strips of paper (corrugated) make graceful, airy flowers. To do this, put a ball in the middle of the strip, lift the sides of the strip, twist it tightly (like a candy wrapper). Take out the ball, keeping the integrity of the petal. A flower is collected from several ready-made petals, the middle is decorated, and a stem is added.

Simple instructions from the review will help create unique works for both children and adults. Inspired to combine different techniques. They will allow you to use not only paper for making flowers, but also ribbons, beads, beads, buttons and other useful things. In the process of improving the model, it is worth complicating. Supplement with the manufacture of complex stamens, stems and leaves. Paper flowers are an inexhaustible theme for creativity and fantasy. They will serve as a decoration for postcards, hairpins, gift boxes, allow you to revive the interior, bring notes of spring and happiness into the house.

Making an accent in your home, designing a souvenir package, or complementing a gift with a unique bouquet is now available to everyone. It only takes a little effort to get the desired result.

How to make beautiful paper flowers? - about this article below. You will find several detailed master classes in it.

How to make a simple and beautiful paper flower with your own hands?

Recently, flower arrangements made of paper have become an alternative: both in the design of halls and souvenirs.

Try to make these simple but beautiful flowers yourself. Detailed instructions and diagrams are below.

For work you will need:

colored paper;
scissors;
diagrams and templates for cutting out parts;
pencil or pen;
glue.

Manufacturing process:

From paper, it is necessary to cut out the details for the future flower according to the templates (for each product you will need: 3 details in the form of a droplet, 1 - four-leaf, 1 - three-leaf, 2 - five-leaf, 3 green parts - leaves).
A pencil (pen, you can use a brush) will help to give the necessary shape to each detail for a future product.
All blanks are glued together. At the beginning, you need to glue larger fragments, and then small ones. Repeat everything according to the diagram below.

There is another interesting version of simple but lush paper flowers.

They are made in the style of quilling.

What you need for work:

Illustrated magazines.
Adhesive tape (green).
Glue.
Scissors.
Barbecue skewers.

Step-by-step instruction:

Here's how to make a paper flower bouquet very simply and effectively.

Large paper flowers - master class

Huge buds allow you to create a unique interior for celebrations. Thanks to them, you can accentuate or highlight a place for a photo shoot.

Large flowers can be grouped into arches, a variety of compositions on the ceiling or wall. To make such a decoration will be quite simple.

Materials for work:

patterns (diagrams) of details;
scissors;
adhesive tape;
colored paper (both sides);
stick or skewer (thicker).

How to make a paper rose

These roses can be made as a souvenir or decoration for a photo shoot.

DIY crepe paper flowers - schemes

To make beautiful buds, you can choose one of the instructions that are presented below. Small or huge flowers can be made in a few hours.

Wonderful lush peonies or a pink bouquet will be a wonderful addition to the interior or a souvenir.

These are such wonderful flowers. blue color you can make your own hands from crepe paper if you follow the step-by-step diagram in the picture.

Volumetric flowers from corrugated paper - step by step photo

From crumpled paper, you can create beautiful bouquets, such as a composition of crocuses.

For work you will need:

corrugated paper;
glue;
toothpicks;
scissors;
brush.

The process of making the composition:

The paper must be laid in such a way that the relief is on the short side.
Now you should cut the paper into rectangles measuring 8 * 4 centimeters.
The blanks need to be crushed in the form of an accordion.
Now, from these additions, you need to cut 6 identical petals, then they need to slightly twist the tips onto a toothpick.
Now it's up to the stamens. They are made from the same rectangles as the petals. The blanks are cut with a fringe, leaving a narrow strip (see the diagram above).
The fringe (each of its elements) must be twisted into a flagellum, and then the future stamen should be rolled into a tube. For this, a toothpick is wrapped with a blank of paper.
The bottom of each of the stamens is smeared with glue, after which the flower petals begin to be fixed one by one.
The completion of the manufacture of each flower will be wrapping the stalk with green paper, and then the leaves are attached to it.

How to make paper flowers for a postcard?

Decorating souvenirs makes every giver think about how interesting and original to design the packaging.

A simple ribbon bow is a thing of the past, replaced by paper flower arrangements.

Even do-it-yourself cardboard flowers made will allow even little man create unique gifts for friends or family.

What is required for work?

colored paper (several colors: pink, red and green, you can choose another color scheme);
a postcard purchased or made independently;
glue;
scissors.

How to make small decorative flowers?

Round blanks are cut out of thin cardboard or paper. The edges of the circle are made serrated. The more such elements, the more magnificent the bud. Flowers can be made in different sizes.
Each blank is folded into 4 or more additions - it depends on what shape you want to give the bud.
Each part is fixed with glue on the postcard.
The stem and leaves will complete the paper plant.

Here are such interesting master classes with step-by-step instructions for your attention that were selected and presented in this article. Imagine, create - everything will turn out!

Interior decoration in floral style is gaining popularity: giant peonies, roses, sunflowers, poppies are used to decorate weddings and themed parties, romantic photo shoots and create unusual shop window designs. Even for hats and suits, you can make large flowers with your own hands - it's no more difficult than assembling a small bouquet or.

Let's talk about materials

When it comes to growth flowers, it is not immediately possible to believe that this beauty is made of paper. But corrugated has unusual properties - in the article on the manufacture of small flowers, we examined them in detail. Recall that crepe paper with a density of at least 120 g with A and B flutes (folds 1.6 and 3.2 mm deep) is most suitable for growth giants - this will allow the petals to keep their shape.

But! Not all growth flowers are made from thick corrugated paper. There are models whose petals should freely bend, curl or fall. For such colors, thin paper is used.

To make large flowers, also prepare auxiliary materials and tools:

thick cardboard for the base;
scissors or a knife for cutting blanks;
thermal gun - large petals are easier to connect with hot glue;
wire for the stem frame;
wire bending pliers;
fabric, thread, cotton wool for stuffing the base or for combining materials;
foam balls or plastic containers as a base.

And you will also need: fantasy, good mood and a little magic ...

Basic techniques and secrets of creating growth flowers from corrugated paper

The whole decorative effect of the finished product depends on the beauty of the flower head. The process of its formation is similar to the manufacture of flowers from isolon, but adjusted for the properties of the material. Let's learn how to create big ones!

Method "accordion"

This funny hat can be made with children - the flower is assembled according to the accordion principle.

We will need several sheets of thin corrugated paper 20–25 cm wide. The length and their number depend on the desired splendor of the finished flower. Before starting work, the sheets must be laid one on top of the other and the edges aligned.

Stages of work:

Fold the sheets with an accordion and scissors to give a semicircular shape to the edges.
Mark the middle of the prepared strip and tie with a thread or clamp with floral wire, forming a loop for subsequent assembly.
Disassemble the accordion, smoothing the edges.

Alternately lift the layers, straightening each sheet.
When all layers are separated, the flower is ready.
You can make several flowers and connect them through prepared loops.

According to this principle, hanging balls from the previous photo were created. To create these colors, you can combine paper of several colors.

The difference of this design is that the inner part of the flower is cut with a fringe separately, and then both parts are combined into a single flower.

And here are some more flowers made in the same technique.

detailed way

You will use this method if you decide to collect giant flowers from corrugated paper with your own hands. To do this, it is necessary to cut out individual petals and leaves according to the templates. Patterns of large flowers differ from small ones only in size, so you can use those that we suggested in the article.

Since you will need a lot of blanks, it is better to make patterns from thick cardboard or pressboard - this way they will last longer. You can cut the petals with scissors or a clerical knife.

Tip: unfold the roll, fold it several times and then cut it out - you will get several blanks at once.

Next, the most creative stage in creating a flower begins - shaping the petals. Smooth bends and detailed elaboration of the edge are obtained by straightening the folds with your hands, stretching the workpiece with a metal ruler or the blunt edge of scissors.

First, using a pencil or stick, twist the edges of the petal, press firmly to secure the bend.

The volume is created by straightening the corrugations: slightly stretch them in the upper part of the petal and almost completely straighten the middle.

In conclusion, you can give the edges a waviness in the same way.

Important! When applying the template to the sheet, it is necessary to ensure that the folds go along the petal - then it can be correctly formed.

In this type of MK, the process of making peony petals is described in detail:

If you are just learning to collect large paper flowers with your own hands, many of the nuances may seem incomprehensible. Let's look at them with an example.

This chrysanthemum is assembled from separate parts, fixed on a branch and placed in a flower pot stand. We will talk about these assembly details a little later.

For the flower head we need:

corrugated paper;
cardboard circle with a diameter of 30 cm;
glue gun.

Cut out the petals and leaves according to the pattern, process the edges and give them a shape.

You will need at least 30 petals of each size, 6 blanks 20 cm high for the sepals and as many leaves as your fantasy and stem length tells you.

Assembly is carried out on a cardboard circle. Let's analyze the nuances, thanks to which the flower will look realistic:

Petals should be directed strictly to the center, thanks to this we will maintain the symmetry of the flower.
Filling is carried out in circles, with the displacement of each subsequent layer to the center by 1.5 - 2.5 cm. This will ensure a smooth decrease in the diameters of the arrangement of the petals, without the formation of voids. Approximately three rows should be obtained from each type of part. If necessary, you should add certain blanks.
The closer to the center, the stronger the petals should be folded up, and the smallest petals are bent almost vertically before gluing, thereby filling the middle. This principle is laid down by nature - the petals open from the bud.

After the front part of the flower head is ready, glue a piece of cardboard tube to the back side, suitable in diameter for the future mount.

The reverse side is decorated with six sepals. They should be glued in a spiral, with the approach to the next one, in order to cover the entire surface of the cardboard base.

Tape method

Flowers made in this way differ little from the previous ones. The whole feature is that the petals are not cut out separately, but are formed on the tape: the profile of the petal is formed in the upper part of the paper strip, and the lower part remains uncut.

Peony, made in this technique:

And another fantasy flower resembling a dahlia:

Leaves and stem

If you are making growth flowers with your own hands, then you will definitely need a stem and leaves. To realistically reproduce the structure of the leaf, make veins and create a relief:

lay a wire in the middle of the sheet,
arrange the corrugations towards the top of the leaf,
reproduce the wavy edge.

Making leaves for growth flowers, see the video:

The next element of the growth flower is the stem. Depending on the purpose, the stem can be made to hold the flower in the hands or as a stand.

In these colors, the stem can be made from a cardboard tube, for example, from foil or cling film, or you can also cut off a piece of plastic pipe. This leg is multifunctional - such a flower is freely mounted on a rack of metal rods.

For the design of spectacular photo zones, a flower on a stem would be an excellent option, as in this photo:

The stem is made of wire frame. The secret of its stability is in a plastic cup filled with cement mortar.

Advice. A plastic cup can be replaced with a small flower pot, and cement mortar with any building mixture: gypsum, alabaster and the like.

The resulting rack should be wrapped with thick paper, then decorated with green corrugated paper. Using any technology convenient for you, make leaves and screw them to the trunk on a wire.

Also, a metal-plastic tube can serve as a stem, and even a real branch - for beauty, they must be decorated with green teip tape.

Metal-plastic tube securely holds the flower
and looks great in the interior

Stand

Guests of the holiday will be very surprised when they find out that you made life-size flowers from corrugated paper with your own hands. And for the design of everything, you will need that stand. It can be metal, wooden or a weighted flower pot.

It is especially important to make a stable stand if you plan to install not one flower, but a whole branch or a giant bouquet.

For options for making stands for growth flowers, see the video:

Important! Take care of stable coasters when decorating wedding ceremonies. Flat supports perfectly disguise themselves as a layer of artificial grass.

Compositions of large flowers on the wall

If you need not a single flower for a photo shoot, but a whole photo zone, you need to decorate the wall. There is no need to do a permanent fastening, because the flowers gather dust over time, they can accidentally break or you just get bored, so you should use simple options:

Double-sided tape - tapes or ready-made mugs are sold. This method is not suitable for a wall in a room, as traces remain on the surface. As a way out, use a portable smooth plastic surface as a base and lean it against the wall, reinforcing it so that it does not fall.
Hooks - are commercially available ready-made with Velcro, but you can attach homemade wire hooks to the back surface with hot glue.
Velcro - ordinary sewing is used, which are attached to the surface with a construction gun, and on reverse side flowers with hot glue. Glue-based Velcro is also sold, which for reliability is also better to reinforce.

All these methods are united by the fact that a special surface is needed for mounting flowers.

But to create an original design, it is not necessary to hang the decor on the wall. You can tie a ribbon with a couple of hooks, to which you can attach flowers and threads with petals, as in this photo:

Or stretch the strings under the ceiling, to which the decor is attached, creating a magical atmosphere.

Video with illustrative examples of attaching paper flowers:

However, large corrugated paper flowers can be used not only for photo zones. They can serve as an amazing costume for a theatrical production or a themed party.

To create these costumes, the designer combined paper with fabric.

For boundless imagination, nothing is impossible! You can even make a chandelier out of corrugated paper. The only condition is that there are no problems with the electrical wiring and that the lamps do not come into contact with the flowers.

And this charming corrugated paper cabbage will be an excellent entourage for a children's photo shoot. It is made according to the principle of flat flowers - on a cardboard base. To make the baby comfortable, there is a pillow in the middle.

There are a lot of ideas for using giant corrugated paper flowers - fantasize, create beauty and delight yourself and others with your creativity!