Choosing the best cigarette puff tank. Choosing the best vape tank Bike e-cigarette tank
Hello, lovers of delicious and thick steam!
Although I left your ranks, I do not lose hope of returning.Long description of the problem:
I started with the cheapest one, bought out of curiosity. And (I didn’t expect it myself!) On the second day I didn’t want to smoke cigarettes at all. The liquids were all delicious, especially the tobacco. There was enough of a couple, I liked everything, and returning to analogue seemed absurd. The euphoria lasted for about a month.
And then the scribe came. The manufacturer closed and my torment began in search of a normal evaporator and tasty liquid. I tried clears with replaceable and non-replaceable evaporators, even rewound these microcoils myself - but happiness did not want to return. These hellish cones flowed, squelched, whistled, did not stretch at all and gave gariki. The desire to smoke added boiling water to the problem. And I bought an Evik mini with a subtank.
The first two days I choked on steam and coughed, none of the old liquid came up. It turned out that the problem was nicotine - it had to be removed completely. But I survived this too, mastered self-mixing, stopped coughing, even got hold of a drip in the pursuit of taste.
And then another scribe came. The taste of liquids ceased to please. He didn't disappear completely, but became nasty. It gave off either metal, or old butter, or soy chocolate, or even hand cream. I steamed a clean base, didn’t steam anything at all, washed the tank, changed the base for kneading and flavoring - the cactus remained a cactus. As a result, I went to a vape exhibition, tried a bunch of liquids, vaped on other devices and made sure that life is pain and everything is not happy.
I abandoned this masochism and returned to regular cigarettes. But health is a pity. I smoked for six months and now I want to try again to switch to steam. And I decided to go the other way - leave nicotine at least 2-3 mg and reduce the power of soaring and the amount of steam (so as not to cough). In short, try to reproduce my favorite ego.
Questions:
As I understand it, in this situation I need a tank with cigarette puff?
Or (well, what if) normal, cigarette and problem-free little ones appeared during this time?
Maybe someone also lost the joy of soaring or returned from the analogue for the second time - what helped you?Buck I looked after Kayfun mini v3 (clone).
What diameter wire to take under a small base? I would like the winding to be 2-2.5 ohms, as it was on his little one.
Does thermal control make sense with such winding or will it not burn anyway? What is better to wind on it - steel, nichrome, titanium or ordinary kanthal?Now I put my Tetris ass in the subtank. The craving changed noticeably, the taste somehow, but returned (especially the tobacco was awesomely brewed for six months). And I'm in doubt - do I need this kayfun? How significantly will it differ from a subtank with a plug? Will there be less vapor and more flavor with it?
I really hope for your help.
Tanks and clearomizers
Every vaper sooner or later wonders what he is, the most best tank for electronic cigarettes. Let's start with the fact that tanks are a device where the steam mixture is generated into steam.
That is why vape users want to choose the best tanks for their gadgets, due to which they can better organize the vaping process. And yet, which tank for electronic cigarette better? This is what we will try to deal with you now.
- serviced (RTA);
- serviced drip (RDA);
- genesis.
There is another category of serviceable atomizers - RDTA, drips that you can service yourself. But in this publication we will talk about ordinary tanks. All of these vaporizer options are equipped with coils, which can be either purchased at a vape shop or twisted on your own.
So, what are serviced tanks. As a rule, most of these evaporators have a base on which, in fact, the heating element (our coil with a wick) is placed. Whereas the tank itself with the vapor mixture is located above the base. Depending on the size of the tank, it can hold from 2 to 10 ml of liquid.
Most of these evaporators, released recently, are equipped with top airflow. The principle of operation in this case is as follows: the air first of all descends to the winding outside the chamber, and only after that it goes up through it, that is, to the drip-type.
The bases of serviced tanks are equipped with slots or holes, through which the vaporized liquid rises through the wick to the heating element
Drips, unlike tanks, have a small bath for refilling, respectively, less liquid will interfere with them. Heating coils are also located at the bottom of the evaporator, and the wicks are immersed in the recharge bath.
In addition, the drip does not have a chamber, since the vapor mixture is in any case below the spirals. Instead, the RDAs are equipped with a top cap that sits on top of the base. Air enters through the bottom, top or side vents and rises from the top cap to the drip tip.
Genesis atomizer is a combined evaporator in which a drip and a tank are combined. They have a capacity similar to the RTA, but they are located at the bottom of the atomizer, under the base. Due to this, the effect of having a deep bath is achieved.
A rolled stainless steel mesh acts as a wick, through which the steaming mixture enters the winding. In addition, Genesis, like drips, has a top cap. Yes, and air circulation occurs according to the principle similar to drips.
Tank Advantages
First of all, I would like to note the advantages of serviced tanks over unattended ones - a vape user does not need to purchase factory coils, they can be made with my own hands. This not only allows you to save on winding electronics, but also gives you the widest possibilities when vaping (the larger the winding area, the more steam it produces).
If we compare tanks with drips, then the former have the following advantages:
- The volume of the contained vapor mixture.
It's no secret that RDAs are drip-filled, that is, they drip a certain amount onto the winding and soar for 8-10 puffs. The tank is good because, as mentioned above, up to 10 ml of liquid is placed in its reservoir. This means that you can use the vape between refills almost all day (it all depends on the frequency of vaping). - If the vape is not standing vertically, then, in the case of a drip, it may leak.
Whereas with the tank, the electronics will not leak. This is due to the fact that there is no camera in the drips, but there is one in the tanks. - Compared to drips and genesis, tanks are easier to wind.
At the very least, genesis owners note that they always have to take care of the correct oxidation of the mesh and determine the hot spots where the mesh will come into contact with the heating element.
To make it easier for you to decide which serviced tank to choose, we offer you our top 5 most popular vaporizers for electronic cigarettes.
Pharaoh by Rip Trippers/Digiflavor
The diameter of this tank is 25 mm, and on its base you can install a single or double winding of a wide variety of configurations. The base itself is equipped with two racks with spring clips for fixing coils. The single wick and opening can be closed and opened by the user of the electronics as needed.
This vaporizer model provides the vaper with the widest airflow adjustment options. This is due to the fact that the tank is equipped simultaneously with three central rectangular holes, the size of which is 5 * 2.5 mm. Thanks to this, both a hookah puff and a tight cigarette puff are possible.
For stable use of the TK mode, the positive connection was gold-plated during the manufacturing process. And thanks to the presence of a PEEK insulator, high vaporization is ensured.
Such a tank is perfect for those vapers who are looking for a brand new, interesting and tasty atomizer for their electronics.
Advantages:
- the presence of a multifunctional base opens up a wide range of vaping opportunities for the vaper;
- the possibility of equipping the base with creative windings;
- ease of maintenance, namely in the installation of wicks;
- good taste qualities of the given steam;
- the possibility of a hookah puff, as well as a tight cigarette;
- good steam generation.
As for the shortcomings, there is only one – for some vapers, a 2 ml tank is not enough.
And in all other respects, these tanks are considered one of the most popular atomizers of our time.
Griffin 25mm RTA by GeekVape
An improved vaporizer model from the world famous GeekVape, which appeared before vapers in a new 25mm version. 2 versions were released: with top airflow and no airflow at all.
The base of this tank can still be equipped with one or two coils at the same time, but unlike the old version, now its size is 17 mm.
In this version of the atomizer, the volume of the reservoir is already as much as 6 ml, which is twice as large as the previous Griffin. These vaporizers are suitable for both experienced vapers, and even novice vapers who have just begun to comprehend the intricacies of such a truly fascinating culture as vaping can handle them.
Advantages:
- high-quality veloci-stands with holes for fixing the winding Ø5 mm;
- the possibility of soaring in temperature control mode;
- the presence of a gold-plated 510 type connector and a PEEK insulator ensures a stable connection between the tank and the vape itself;
- a sufficiently large volume of the tank for refueling;
- the ability to use various drip types;
- providing fantastic taste and a decent vapor cloud;
- ease of installation of spirals and wicks.
Of the shortcomings, only that this tank is a bit tall.
Avocado 24 by GeekVape
A modern tank, the diametrical size of which is as much as 24 mm. This evaporator model is equipped with high-quality velocity stands, with which you can securely fix the coils on the base.
The size of the opening for the wicks is 4 mm, which allows even beginners to use such devices. As for the volume of the reservoir, this advanced model includes as much as 5 ml of liquid.
Innovative dual 3mm refill ports with pivoting lid make refilling simple and easy. In addition, Avocado provides the ability to adjust the size of the air duct opening: if they are fully opened, then their size will be 7 * 2 mm. To change the size of the holes, just rotate the top cap.
In addition, the tank is equipped with a ceramic insert that can be installed instead of one of the coils. Thanks to the convenient base and ease of maintenance, the Avocado 24 will appeal to everyone, from a novice vaper to a professional.
Advantages:
- getting a bright taste of steam even with an active one spiral;
- excellent vaporization when using two spirals;
- ideal price / quality ratio;
- wide range of vaping options;
- the possibility of soaring like on a drip;
- due to its small size, this tank will perfectly complement almost any vape;
- Due to the possibility of complete disassembly, this vaporizer can be completely washed after use, which greatly extends its service life.
Flaws:
- this tank may leak if dropped.
Another vaporizer that is very popular among pro vapers. In terms of performance, it has certain similarities with the Geekvape Griffin tank. It is easy to use, has a spacious base that can easily fit two coils.
This tank is mostly designed for aroma transfer, but can also be used for sub-ohm vaping.
Advantages:
- convenient and affordable design;
- simple and spacious base with the ability to install a pair of spirals;
- convenient refueling process - top;
- high rates of vaporization and taste transfer;
- ease of installation and assembly.
Flaws:
- it is not intended for releasing huge clouds of steam, that is, it is better not to take this tank for cloud chasing.
Kayfun v5 by SvoeMesto
The tanks of this manufacturer are valued by their owners for their excellent transmission and wide possibilities for adjusting the vaping process.
Advantages:
- the widest range of airflow adjustment;
- you can buy a tank in stainless steel or glass;
- high quality construction, which leads to a long service life;
- the possibility of equipping the base with large spirals;
- excellent flavoring.
Of the shortcomings, only that there is no hookah puff on this tank.
If you use an electronic cigarette with a tank, then here are a few good advice on the use of such gadgets:
- In order for the vaping process to be of high quality, you need to make sure that the coil covers the air duct opening, especially in atomizers with a bottom airflow.
- Coils that are too short will cause liquid that drips onto the wick to enter the blow hole, resulting in gurgling and leaks. To prevent possible vaporizer leaks, you need to make sure that the vapor mixture does not drip freely onto the base past the tails of the wick. The latter should optimally block the holes for the liquid.
- If the tank starts to vape dry, it means that you have overdone the blockage and prevented the liquid from moving. To balance the vaping process, you need to replenish the tank with filling in a timely manner and monitor the level of liquid in it.
- Tanks will be the most suitable option for the first vape on serviced vaporizers, since most of these gadgets allow the vaper to reach the base at any time to reinstall the wick.
- And, lastly, make sure that the container is not overfilled with vaporous liquid. There should be some air left in it, due to which the liquid can evenly soak the tails of the wick. It also causes the timely replacement of the evaporated liquid with air.
Summing up
Tanks are a great alternative to conventional atomizers. They are roomy, tasty and give out a lot of steam. In the case of serviced evaporators, it is easier to wind the bases yourself, and it will be cheaper in terms of money. Maintenance-free tanks after use (which is 6000-8000 puffs) are subject to disposal, and there is no possibility of varying the characteristics of the coils on them.
From the top tanks offered above, you can choose for yourself the device that will definitely be able to satisfy your vaping needs. What vaporizer do you think is the best to use on electronic cigarettes?
There are two types of puff - hookah (also called Californian) or cigarette, which, as its name implies, is similar to the cravings of familiar cigarettes. The vast majority of tanks have a free hookah puff. She gives a large number of steam and depends on how well the airflow is organized, when the holes are wide, a lot of air enters the spiral through them and it passes freely. At the exit, a free California puff produces a lot of vapor.
The situation with cigarette puffs is different. Cigarette draft is not at all free, but rather tight. To carry out a cigarette puff, you need a well-thought-out airflow - the holes must be covered strongly enough so that air can be drawn in with difficulty, which ensures “tightness”. Since in this case less air will enter the spiral than with a hookah puff, therefore, at the outlet, the tank with cigarette cravings will produce less steam.
The vaping culture welcomes big piles and steep clouds of vapor, which is why most tanks are designed specifically for California free draft. While most beginners, in an effort to replace cigarettes, are looking for tanks with a tight cigarette puff. that have a California craving.
Best Cigarette Puff Tanks
Tilemahos V2 by Imeo
Convenient tank with top filling, 4 ml capacity, equipped with frosted glass. The tank has two-way airflow, it has the ability to change the base, where you can install the coil without much difficulty. The tank is very well built, and the original unit is unlikely to experience anything like broken threads, loose o-rings, or fluid leaks. It works well both on open holes for blowing the coil, and on closed holes for getting a tight cigarette puff.
Pico RTA by Promist Vapor
One of the most popular tight draw tanks. The tank itself is quite small, as the name suggests: pico (abbreviated from Italian "piccolo" - small). This tank is only 30 mm high. The tank conveys the taste very well, is equipped with a convenient top filling, has replaceable evaporation chambers, several types of airflow. Here, it is the tight puff that is well implemented, but with the Californian, everything is somewhat more complicated. The tank is designed specifically for a weak amount of steam, and not for a large bulk.
Merlin Mini RTA by Augvape
Easy-to-use top fill tank with 2.5 ml e-liquid capacity. It has the ability to change the bases: one base is designed for two coils for a Californian puff, and the other for one coil for a tight cigarette. At the same time, the airflow of this tank is very wide, air can be supplied to both two and one spiral. The tank is considered universal, since it has two different airflows, it is designed to produce huge clouds of steam, more precisely, for a Californian open draft, and for a tight cigarette puff. It conveys flavor very well and can work well with wide fat coils.
Caiman V4 RDA by Flexoprint
One of the rare types of drips, working under a tight cigarette puff. The drip, compared to its other counterparts, looks quite large and looks like a tank. The reason is that it is equipped with a liquid overflow protection system, or rather, it has a special metal flask inside the device, it also includes several interchangeable plugs (sleeves) for adjusting the airflow (1.7, 2.3, 3.2 mm) . Dripka has a volume of 2.5 mm and is equipped with a fairly deep bath. Dripka is considered one of the best because it is universal, can be used for different types puffs, perfectly conveys taste, you can take it with you everywhere without fear of leaks or overflows.
Kayfun V3, V4, V5
One of the most popular devices among vapers, about which almost everything possible has been said. This is a device that is magnificent in its design features, in which all parts fit together with perfect accuracy. It is extremely reliable, eliminates leaks, squeaks and backlash. All Kayfun devices are perfect for cigarette puff. an almost perfect device in its characteristics, but it requires very fine tuning, unlike the V3 and V5, which are quite suitable for a beginner.
By-ka V6 V7 and others from Vape Systems
By-ka is a very popular device primarily used as a taut cigarette tank. Almost any a new version by-ka will always have the main characteristic - the presence of a tight puff. By-ka is praised for having a very generous package, which includes not only additional glasses, metal flasks and o-rings, but also evaporation shafts, drip tips and tightening sleeves. In other words, a vaper can literally assemble his own device on his own. By-ka is very versatile, it can both pour abundantly and give a modest "cigarette" amount of vapor.
If you are just learning the art of vaping or just do not want to waste time on ingenious manipulations with accessories, we offer you to buy a tank of e-liquid. This is a convenient design distinctive feature which are replaceable evaporators. It is enough just to replace them - and you do not need to bother with windings and calculations. The Sea Para online store is distinguished by a wide range of these products, and there is always something interesting for beginners and avid vapers.
The good thing about using cigarette tanks for electronic cigarettes is that you can find a replacement coil almost any time in our store. Installing it takes little effort, no additional tools are needed. The choice of an evaporator involves the selection of an element with different resistance. It is chosen specifically for your needs, based on your tastes. When using a tank over the evaporator itself, some experiments can be done. So, many prefer to change the winding, which gives a completely different taste and steam.
There are modified versions that allow significant energy savings. Clearomizer with replaceable coils for sale. Regular and larger versions of the tanks are available, which allow you to end up with more steam. The "Sea of Para" presents products of leading brands in the field of vaping. And among the users of the site there is always an independent vote for the "star" of a particular model.
Benefits of buying tankomizers in our online store
Vape tanks are a separate category of components and one of the key elements of any set-up. This component of the electronic cigarette is responsible for converting liquid into vapor and the taste that the user will ultimately experience. The key design feature of the tank is the presence of a reservoir for e-juice.
Variety of vape tanks and their characteristics
The presented components for electronic cigarettes are divided into two main types: serviced and maintenance-free. The first includes RTA (atomizers) and RDTA (bakodrips), the second - clearomizers on replaceable evaporators. Structurally, they all consist of an evaporation chamber and a liquid reservoir. Let's consider each type in more detail:
- RTA. Serviced atomizers, allowing you to experiment with windings.
- RDTA. They combine the capabilities of drips and tanks, which gives a deep taste transfer and the possibility of self-service, but does not require constant refueling.
- Clearomizer (tank). They work on ready-made evaporators that are easy to replace.
Each type has its own advantages and disadvantages, so even a professional vaper will not give a clear recommendation “which is better”. The final decision remains solely with the user.
Features of choosing a vape tank: what to consider?
The purchase of functional elements for a future set-up should be based on the appropriateness of their use. This means that a regular clearomizer is hardly worth choosing for a mechanical mod, while a serviceable tank (RTA) is hardly suitable for beginners with a simple box mod. But not only the capabilities of the user himself play a role. When buying a tank, it is important to pay attention to the following characteristics:
- Reservoir capacity. The volume determines how long you can vape without adding more e-liquid. The standard option is 2 ml, but there are also tanks with replaceable bubble glass that allow you to increase the capacity to 4 ml or more if you wish.
- The presence of a blowing system and the possibility of regulating the latter. Air intake openings can be located in the base or top of the device, there are also tanks with side airflow. The depth of taste transfer depends on this design feature.
- Possibility of service. This implies the selection according to such parameters as the diameter of the base, its configuration and the number of racks. The best option for experienced users - RTA and RDTA, for beginners a tank with replaceable evaporators is more suitable. Other characteristics of the tank are less significant and more individual - design, dimensions, manufacturer. To make the set-up look organic, it is enough to choose a tank or RTA that matches the box mod / mech mod in terms of color and diameter, the rest is really a matter of taste and personal skills of the user.