Sweater with dropped shoulders. Off Shoulder Pullover

Dimensions
36/38 (40/42) 44/46 (48/50)

You will need
Yarn (100% camel wool; approx. 100 m / 50 g) - approx. 650 (700) 750 (800) g red; knitting needles No. 3 and 4; circular knitting needles No. 3; 200 (200) 220 (220) cm red satin braid 3 mm wide.

Patterns and schemes

Front surface
Facial rows - facial loops, purl rows - purl loops.
In circular rows, knit all loops.

Wrong side
Facial rows - purl loops, purl rows - facial loops.
In circular rows, purl all loops.

Band A
Alternately 2 facial, 2 purl.

Elastic band B
Alternately 3 facial, 3 purl.

structural pattern
Knit on an even number of loops:
1st row: chrome., * 1 front, 1 p. remove, as with purl knitting (thread before work), from * repeat, chrome.
2nd + 4th rows: between chrome. knit purl loops.
3rd row: chrome., * 1 p. remove, as in purl knitting (thread before work), 1 front, from * repeat, chrome.

In height, repeat from the 1st to the 4th rows.

Pattern "Leaves"
In a width of 28 p. of the scheme, knit 1 x. In height 1-4th row, perform 1 x

Important!
The pattern "Leaflets" is performed on the back.

Pattern Sequence
10 (12) 14 (16) p. structural pattern,
12 p. pattern "Leaves", 8 (10) 12 (14) p. structural pattern,
12 p. pattern "Leaflets", * 8 (8-10-10) p. structural pattern,
12 p. pattern "Leaflets", from * repeat 4 more x, finish 18 (22) 24 (28) p. structural pattern = 160 (168) 184 (192) rows.

Cross ribbed pattern
8 p. out. smooth,
3 p. facial surface,
8 p. out. smooth (start with the back row and finish with the front row),
3 p. front surface (start and finish with 1 purl row),
8 p. wrong side, 2 p. front surface = 32 p.

Decorative reductions
On the right edge: chrome, 2 p. of the front surface, 2 p. knit together with a slope to the left (= 1 p. remove, as with facial knitting, knit the next loop with the front one and stretch the removed loop through the knitted one);
on the left edge: knit 2 p. together with a slope to the left, 2 p.

double loop
After turning at the beginning of the row, lay the thread before work, insert the knitting needle on the right into the 1st p., Remove the loop together with the thread. Then pull the thread back strongly = double loop. In the next row, knit both parts of the double loop as one according to the pattern - front or back.

Knitting density
24 p. x 37 p. \u003d 10 x 10 cm, connected with a structural pattern or a Leaf pattern;
24 p. x 30 p. = 10 x 10 cm, connected with a transverse ribbed pattern.
Both samples are knitted with No. 4 knitting needles.

Pattern

Completing of the work

Before
On knitting needles No. 3, dial 118 (126) 138 (146) loops and tie for the bottom bar 6 cm = 20 p. rubber band A, while in the 1st person. row after chrome. start with 1 out. loops.

For side bevels, add on both sides according to the pattern in each 14th p. from the lower bar 6 times (in each 14th p. 3 times and in each 12th p. 3 times) in each 14th p. 3 times and in every 12th p. 3 times (in each 12th p. 5 times and in the next 10th p. 1 time) 1 p. = 130 (138) 150 (158) p.

For raglan bevels through 25.5 (23) 23 (21) cm = 94 (86) 86 (78) p. from the lower bar, subtract 1 x 1 p. on both sides, then in each 4th p. another 16 (20) 24 (28) x 1 p each (see decorative reductions above) = 96 (96) 100 (100) p.

After 18 (22) 26.5 (30.5) cm = 66 (82) 98 (114) p. from the beginning of the raglan bevels, temporarily leave the remaining neck loops.

Back
Knit as before, but after the lower bar on the middle 28 p., perform patterns in the above sequence.

Sleeves
On knitting needles No. 3, dial 42 (46) 50 (54) loops and tie for the bar 6 cm = 20 p. rubber band A, while in the 1st person. row after chrome. start with 1 out. loops, and in the last out. row, evenly distributing, add 4 (6) 8 (10) p. = 46 (52) 58 (64) p.

Continue working with a structural pattern on needles No. 4.

For bevels, add on both sides after the 6th p. gum 1 x 1 p., then in every 6th p. another 12 (8) 4 (0) x 1 p., add loops to include in the pattern.

At the same time, after 16.5 (15.5) 14.5 (13.5) cm = 62 (58) 54 (50) sts from the elastic band, knit with a transverse ribbed pattern = 76 (84) 92 (100) sts.

After 10.5 cm = 32 p. from the beginning of the transverse ribbed pattern, continue working again with a structural pattern.

At the same time, perform raglan bevels, as on the front, while starting with the 1st decrease in the 1st row = 42 p.

After 18 (22) 26.5 (30.5) cm = 66 (82) 98 (114) p. from the beginning of the raglan bevels, temporarily leave the loops.

Assembly
Perform ragged seams, side seams and sleeve seams.

On the right sleeve, mark the middle 12 p. The left loops of all parts are transferred to circular knitting needles, starting with 12 marked loops of the right sleeve = 276 (276) 284 (284) p. both sides of the middle 12 loops.

After 9 p. from the beginning of the collar, continue work with shortened rows (after the 9th p., turn the work): double loop, 1 out. knit a row up to 12 marked loops and temporarily leave these 12 p., for this, before the marked loops, turn and perform a double loop.

After that, another 16 x at the end of each next row of 15 p. Leave the same = 24 p.

After the last out. turn the row, make a new mark for the beginning of the circular row and from the mark again knit on all loops in circular rows.

Run 5 rounds. R., while in the 1st circle. R. knit double loops according to the pattern along with the next, respectively, the previous loop.

After that, close the loops according to the drawing.

Pass the satin braid through the holes of the 1st row of the collar-bar = start and finish at a distance of 10 cm from the middle of the front (“stitches” are laid along the front side over the front tracks).

You can adjust the depth of the cutout with the help of the tape.

Stylish youth sweater with a lowered shoulder, oversized, from the designers of Quail Studio.

Knitted sweater with a dropped shoulder, oversized cut, with a description.

Oversized cut has been popular among fashionistas for a long time, so many designers use it in their models, including Quail Studio designers. The new sweater combines several fashion trends - a loose fit, a wide sleeve and an open shoulder. Warm clothes can be not only practical, but also attractive.

The sweater looks quite simple at first glance, but at the same time it will help bring out the beauty of your yarn and allow the image not to be overloaded with different details. The main advantage of such a sweater is the ability to change the image with the help of a belt and accessories. A loose cut will help hide some figure flaws.

The sweater is knitted from thick yarn and 5.5 mm knitting needles, so you can knit a fashionable and stylish wardrobe item quite quickly. Such a sweater will help create a light, playful, laid-back look. The sweater is knitted piece by piece from the bottom up, then sewn together. The size range is very wide XS (S, M, L, XL, XXL).

To knit this off-the-shoulder sweater you will need:

Yarn: 11(11,12,12,13,13) skeins of Rowan Mako Cotton (shade Dusty Gray 002)

BOOKS ON KNITTING http://got.by/1xymgz, CHEAP BOOKS WITH PATTERNS http://got.by/1wrnrv

Dimensions: 34 (38, 42)

The description is given for the first size.

Data for large sizes are given in brackets.

If only one value is specified, it applies to all dimensions.

You will need:

175 (200, 225) g of Lana Grossa Mohairnuovo (44% baby alpaca, 44% superkid mohair, 12% polyamide; 70 m / 25 g) dark gray (No. 2); knitting needles 5 and 6 mm; circular needles 5 and 6 mm, each 40 cm long.

Double edge loop: At the beginning of each front row, knit the first loop of the front one, remove the trace. p. purl, thread at work; at the end of the front rows, knit to the last 2 sts, remove the trace. p. purl, thread at work, knit the last loop of the front.

At the beginning of each out. row, remove the first purl loop, thread before work, knit a trace. p. out.; at the end of out. rows knit to the last 2 p., knit next. p. out., remove the last. p. purl, thread before work.

Elastic: 1 persons. p., 1 out. P.

Persons surface: persons. R. - persons. p., out. R. - out. P.

Knitting density:

persons. stitch on knitting needles No. 6: 13 p. and 19 p. = 10 x 10 cm.

Note:

The arrow on the pattern indicates that the central additions form a dropped shoulder.

Back:

On needles 5 mm cast on 51 (55, 61) sts.

Track. persons. R.: double chrome. P.; starting from 1 out. p. (1 out. p., 1 person. p.), knit with an elastic band until the last. 2 p., double chrome. P.

Track. out. R.: Knit according to the pattern.

Switch to 6mm needles and continue in pattern until back measures 7cm from cast on. Finish out. R.

Track. persons. R.: double chrome. p., knit trace. 17 (19, 22) p. persons. ch., next 13 p. with an elastic band, as indicated, next. 17 (19, 22) p. persons. gl., double chrome. P.

Knit with a pattern according to the scheme. Central additions to the next. persons. rows knit trace. arr.: make an increase with a slope to the right before and after the central 13 p.

Added loops include in persons. smooth surface.

Repeat the row with increments in every second person. R. 19 times = 91 (95, 101) p.

At the same time, when the back is 20 cm from the cast-on row, place a marker at both ends of the last row to mark the top of the side slits.

At the same time, when the length of the back is 14 cm from the markers, follow the edges of the sleeve. persons. R. track. arr.: double chrome. p., twice, 1 out. p., knit according to the pattern until the last. 7 p., twice, 1 out. n., double chrome. P.

Continue with the pattern until the length of the back is 18 (19, 20) cm from the edge of the sleeve. Finish out. beside.

Performing both sides separately, cast off 1 x 1 sts from each edge of the neckline, then cast off the remaining 38 (40, 43) sts for each shoulder.

Before:

Run on one center. less inc = 89 (93, 99) sts. Work as a back piece until front measures 14 (15, 16) cm from edge of sleeve. Finish out. beside.

Neck shaping: Set aside the center. 13 p. for extra. knitting needle.

Working both sides separately, knit straight until the length of the front is equal to the length of the back to the shoulders.

Bind off remaining 38 (40, 43) sts for each shoulder.

Assembly:

Spread the details according to the pattern, moisten and allow to dry.

Run shoulder seams.

Sew side seams between side slit markers and sleeve edges.

On circular knitting needles No. 5 along the neckline, evenly raise and knit facial 52 p., Including loops with additional. knitting needles for the back and front of the neck.

Lock in a circle and knit in circular rows of 12 cm with an elastic band.

Switch to circular needle size 6 and continue in rib for another 12 cm.

Close all loops loosely according to the elastic pattern.

I didn't find this one, but I found others.

White pullover made of thick yarn.

Yarn (100% acrylic, 250 m / 100 g) - 1000 g white, knitting needles No. 6, hook No. 6.

Main pattern: the number of loops is a multiple of 10 + 2. Knit according to the scheme, after the 5th row, repeat the pattern from the 2nd row.

The product is made with a thread in 4 additions.

Front / back: crochet dial 34 air. p. and knit a rectangle 43 cm high according to the scheme, then close the loops.

Sleeves: crochet dial 22 air. n. and knit according to the pattern. After 40 cm, close the loops.

Assembly: product without shoulder seams, sleeves are sewn from the very top of the connection between the front and back. Sew the side seams. For the upper and lower slats on the knitting needles, type 68 p. (All slats are knitted in 6 threads) and knit in a circle of faces. 10 cm stitch. If desired, reduce the top bar by a few loops (from the side seam in each 2nd row, cross the loops to the left). For sleeves, type 22 sts on the needles and knit faces. stitch 10 cm.

And further

Jumper

Size: 36/38

You will need: 380 g of yellow CLASSICA yarn, knitting needles No. 6 and No. 7, circular knitting needles No. 6.

Elastic band: knit according to scheme 1, in out. R. knit loops according to the pattern.

Main pattern: knit according to scheme 2, in out. R. knit loops according to the pattern.

Knitting density:

Elastic band: 20 p. x 28 p. = 10 x 10 cm;

Main pattern: 16 p. x 20 p. = 10 x 10 cm.

Description of work: for the central part on knitting needles No. 7, dial, 50 p. And knit with the main pattern. After 140 cm from the beginning of knitting, close all loops. Sew along the lines marked in red on the pattern. For a belt on knitting needles No. 6, dial 82 p., tie 15 cm with an elastic band and close the loops.

For the collar: on circular needles No. 6, dial 276 p., tie 15 cm with an elastic band and set aside the loops. Kettle the collar to the central part according to the pattern. Sew on a belt.

If the cold season is just around the corner, it's time to pay attention to it - a knitted one-shoulder sweater. Warm, delicate, stylish one-shoulder items have gained popularity among our mothers. Once we laughed at old photos of our mothers, at their somewhat comical clothes. But as fashion tends to come back, the off-the-shoulder sweater is becoming more and more relevant today.

The history of the formation of models with lowered shoulders began quite a long time ago. At the peak of popularity, sweaters demonstrating the sexuality of a bare shoulder have been around since the 80s. One decade later, the fashion trend is back. In 2009, Michelle Obama herself wore a white off-the-shoulder dress. Since then, this direction has become incredibly popular. If you are looking for a sweater that is incredibly comfortable to wear, as well as gentle and flirty, then you should start shopping. But before you buy a loose one-shoulder sweater, remember some useful rules.

Have you noticed this model for the first time? Then give preference to a monophonic option! It can be both bright shades and pastel colors according to your desire. If you want to decorate the finished product a little, pay attention to the accents that fashion designers offer. For example, frills or rhinestones will make sweaters not very simple.

If you picked up a sweater with a bare shoulder, then be more careful in choosing accessories. The belt will help highlight the beauty of your waist and make your appearance more elegant. In addition, large earrings and a handbag will help emphasize your tenderness and femininity. Rings and shiny earrings are more suitable for this sweater. Too voluminous accessories around the neck will ruin the look, so you should not buy overly massive jewelry.

Benefits of this sweater

• Not as hot as a regular sweater.
• There is a choice of style and the presence of a belt, as well as decorative components.
• A sweater with a bare shoulder demonstrates sex appeal and tenderness.
• Can be worn with jeans, trousers, skirts and even shorts.
• It hides some figure flaws, for example, full arms and shoulders, as well as an imperfect waist.

What to combine with a one-shoulder sweater?

It remains to find out with what to wear a jacket of this cut. First of all, the sweater model exposes part of the body, so in the cool season, cover your shoulders with a jacket or jacket. Wide-cut sweaters look great with fitted trousers and jeans, as well as a pencil skirt. Follow the rule of harmony, preferring a voluminous bottom with a tight-fitting top and vice versa. Keeping proportions in mind will help you create a really modern and fresh look!

An elongated open-shoulder knitted sweater has been consistently popular for several seasons. It looks very elegant both as a dress and as a tunic. Such a sweater can be combined with leather trousers, leggings, skirts, sewn from any material.

Since the jacket reveals the shoulders, take care of the right choice of underwear. It is best to purchase a bodice without straps. If you want to specifically show off your bra, opt for neutral shades and expensive brands. Thus, you will be able to create a romantic and gentle image.

Some examples of combinations

Bought branded items? It remains to find out exactly how they should be combined together. For a romantic date, a tight pink sweater, a gray pencil skirt, elongated earrings, a leopard scarf and shoes of the same print will be very useful.

If you are going to a party, opt for leather pants, a shiny coral-colored knitted sweater and a light, stylish scarf. For an office exit, you can choose several options, as shown in the photo on the Web: a beige sweater and a tight-fitting skirt, black trousers and a white jacket.

Today, when creating a female image, there are no restrictions. You can easily be guided by your own taste and fashion trends. It is a one-shoulder sweater that demonstrates both flirtatiousness and sexuality, humility and courage, tenderness and fortitude. This is a must-have item in your wardrobe!