How to open an irbis tablet. How to open the tablet cover? Detailed disassembly instructions

A tablet is a device assembled in such a way that it gives the impression of solidity. There are no screws or latches, no places where the two halves of the case fit together - none of this is practically visible. This is a rather deceptive representation, since the technique, if necessary, can be disassembled. Specialists cope with such a procedure quite quickly, it remains for the owners to find out the act of opening the cover of the tablet.

Why open the tablet cover?

A common cause of disassembly is the replacement of the battery. Sometimes the device needs to be cleaned, for which you also need to open the lid. In other cases (when there is a suspicion that the device is broken), it is recommended to contact specialists with the appropriate tools and experience.

How to open the lid on the tablet?

The back cover fits quite snugly to the front, and therefore the work is not easy. Owners of rare models will need to read the instructions before starting work. Information can also be obtained from specialized forums or specialized sites.

To open the lid of the tablet, you will need the following tools and equipment:

• A set of special screwdrivers. Included must be hexagonal and triangular, Phillips, straight screwdrivers.
• Hot air gun.
• A plastic card, a special plastic tool - everything that will help you do the job as accurately as possible. Sometimes a guitar pick is also used for this purpose.

The order of the forthcoming work

The process of removing the cover from the tablet consists of several stages:

Tablet review. Some models have fasteners that need to be unscrewed. There are also models that also provide latches, they have to be snapped off.

• Loosening fastener. Screws, screws should be unscrewed using appropriate screwdrivers.
• Cover opening. It is necessary to carefully pry off the picks or other thin instrument, a card, the cover of the tablet. Inside are fragile components that cannot be damaged. The vast majority of technology opens in this way, but there are also devices that are quite difficult to unwind.

How to open the tablet cover without using tools?

An old plastic card with pointed ends is suitable for this. Any thin plastic object is also suitable. You can use a suction cup, a soldering kit, a thin knife, tweezers, double-sided tape.

Tablet Oysters KIDS 8.

Tablet Oysters KIDS 8 16Gb Blue Cortex A9 / 512 / 16Gb / WiFi / Andr4.1 / 8 / 0.49 kg.

This tablet has been on sale for a long time and may be in need of service. In our service center you can perform post-warranty repair of the Oysters tablet SC provides the following services:

Buy in store:

Disassembling the tablet oysters t7v 3g

Order with delivery:

Sales are not expected, usually this condition of the product means that it is discontinued.

Properties Tablet Oysters KIDS 8.

The information on the prices of the product and the configuration indicated on the website is not an offer in the sense determined by the provisions of art. 435 of the Civil Code of the Russian Federation.

Features, supplies and accessories for Tablet Oysters KIDS 8.

Headphones for tablet.

The tablet may be supplied without earphones or with low quality earphones. Choose from our range of headphones that best suits you.

Reviews about Tablet Oysters KIDS 8.

We tried to make the description as good as possible, so that your choice was unmistakable and conscious, but because we, perhaps, did not exploit this product, but only felt it from all sides, and after you buy it, try it in work, your review is able to make this world a better place, if your review is really useful, then we will publish it and we will give you the opportunity to make a subsequent purchase from us in the 2nd column.

Performance Comparison and Benchmark Results Tablet Oysters KIDS 8.

To give you an idea of ​​the performance of a selected product (not yet in our test lab, but we're working on it), the chart shows the test results for 10 products that are similar in price to the selected one. Characteristics in percent indicate the approximation to the maximum of the recorded results.

For comparison, only products that are currently in stock are used.

If you decide to approach the choice of new equipment seriously and responsibly, the full rating Tablet Rating on Android based A that includes test results for currently out-of-stock products.

percentage of very recorded results on all tests.

Reviews and related articles Tablet Oysters KIDS 8.

Tablets (tablet computers)

Tablets Apple iPad.

Archos tablets.

Tablets ASUS.

Digma tablets.

Lenovo tablets.

Oyster tablets.

Tablets Prestigio.

Samsung tablets.

Tablet Repair.

Screen replacement tablet.

Firmware tablet.

Replacement glass, touch panel on the tablet.

Replacing the USB connector in the tablet.

Replacing the power connector on the tablet.

Quality headphones.

Headphones Sennheiser CX 300-II Precision Black.

Headphones Panasonic ERGOFIT RP-HJE125E-K.

Headphones Sennheiser HD 180.

Convenient cover.

Case for tablet.

Case for tablet.

Case for tablet.

Congratulations on National Unity Day!

Ladies and gentlemen! Computer Supermarket NIKS congratulates you on National Unity Day and informs you that only retail stores in Strogino and Avtozavodskaya are open on November 4 and 5. November 6th (Monday) All retail stores are open on a Sunday schedule (shops that are normally closed on Sundays are closed). The dealer department and service centers will have a day off on November 4, 5 and 6. We wish you a good weekend!

Compumarket NICS About company Information Contacts Opening hours Directions Where to buy? Buy in Moscow Star.

(m. Alekseevskaya) Kashirka.

(m. Domodedovskaya) Altufievo.

(m. Altufievo) b-r Rokossovsky.

(Shopping center "Fabrika") Academician Yangel street.

(Shopping center Prague) Avtozavodskaya.

(TC OrangePark) Strogino.

(TC "Solar Wind") Korolev.

(p-kt Kosmonatov, shopping center "Jupiter") Balashikha.

(Highway Enthusiasts, shopping center "Galion") Dolgoprudny.

(Pervomayskaya, 17) NIKS-Tver.

Items in stock - 4263, and this number is growing.

Short description

I removed the back cover of my Oysters Tablet PC. This morning I had a hard time getting the back cover of my Oysters Tablet PC like u. How to open the tablet cover? How to disassemble the tablet of the following companies. How to open the back cover of the tablet. Before you open the cover, you must have a new battery to replace. Do you have it? How open tablet. Remove the tablet cover. How to open the tablet without contacting the service and is it possible to remove the back cover of the tablet yourself. Troubleshooting Oysters tablets. How to enable Without understanding the design of the Oysters tablet Tried to remove cover. How to disassemble a Chinese tablet. How to open the lid of Asus TF700 tablet. How to disassemble the tablet yourself (photo, video. How to disassemble the tablet, disassembling the tablet and removing the mediator back cover. How to disassemble a tablet at home. How to disassemble a tablet - Where to buy a charger for a tablet?

In the 21st century, human life is closely connected with various digital technology. It is difficult even for a child to imagine his life without various gadgets. Just the same, through the fault of children, breakdowns of computers, game consoles, and smartphones most often occur. Many people, for one reason or another, do not want to contact service centers for the help of professional craftsmen.

Repairing appliances at home, of course, is possible. But not everyone knows how to disassemble a tablet, mobile phone Or even a mouse with your own hands. We will deal with the breakdowns of the "tablets", and find out how to open and fix it.

The presented instructions are suitable for many tablets. Although they all differ externally, in fact there are practically no differences in the analysis of the device.

The information in the article is suitable for owners of gadgets from the following manufacturers: Wexler, Wacom, PiPO, Prestigio Multipad, Digma, Huawei, Chuwi, Teclast, Cube, FNF, Onda, Colorfly, Ainol, Ramos, BQ, Irbis, Explay, Ginzzu, teXet, Vertex, Mystery, Qumo, Dexp, Oysters, Supra, No-name, and is also relevant for brands such as Apple, Lenovo, Microsoft, Acer, Asus, Sony, samsung galaxy Tab.

The whole process consists of several stages:

1. Removing the back cover.
2. Front panel compartment.
3. Removing the battery.
4. Display work.
5. Let's consider each stage in detail.

Before proceeding with the analysis of the gadget, you should remember that your unskilled intervention can permanently disable the device. Rough handling of the tool may damage the contacts, motherboard, screen, or main processor of the device.

Necessary set of tools for disassembly

In order to open any device, you need a set of tools. In the case of repairing a tablet computer, it looks like this.

• Special set of curly screwdrivers. On different devices there are screws of different form factors. A similar set of screwdrivers with a variety of cross-sections will come in handy when repairing.
• Thin knife or plastic spatula. It will help to open the body elements that are tightly adjacent to each other. You can use a guitar pick.
• Surgical forceps. Get to where your fingers can't reach.
• Super glue or tape. The manufacturer fastens many elements with the help of adhesive tape. It will be needed after the repair to return everything to its original positions.
• Soldering dryer. It will be needed when disconnecting the sensor from the matrix, and the protective glass from the housing frame.

Main stages of work

There can be a lot of breakdowns that caused the Android tablet to be disassembled: the glass broke, it does not turn on, the charging socket needs to be replaced, it is not possible to remove or insert a SIM card.

Removing the cover

• Carefully read the instructions (comes with the device or look on the Internet).
• Using a plastic spatula, a pick, or a thin knife, find the fixing clips. On different models they are located in different places. Try not to damage them. In the future, it will be difficult to assemble the device back.
• Inspect the housing for screws and bolts. If there are any, unscrew them with a suitable curly screwdriver.

Opening the top

The front part is opened in a similar way. It is necessary to snap off all the fasteners. Pay attention to the screws inside the tablet after removing the back cover. Some of them go through and hold the frame of the front panel. Perform all actions very carefully so as not to break the monitor.

Disable loops

A cable is a flat strip of wires. Depending on the purpose, it has a different width. As a rule, the widest one goes from the motherboard to the display. Narrow loops connect a microphone, speakers, volume control buttons, a battery.

After the plastic case is separated from the main iron, inspect the insides of the gadget. Using tweezers, carefully disconnect all cables.

Be careful! A torn cable is almost impossible to repair. You will have to drive the address of the nearest radio parts store into the navigator.

We take out the battery

The rechargeable battery in the "tablets" is built-in, and is connected to the device with a cable. It cannot be removed like a battery from a phone. In most cases, it is attached with double-sided tape, screws or adhesive. Use one of the tools from your kit, depending on the mounting method. Remove the battery.

Screen work

Here, more than ever, “straight hands” will come in handy. Working with a hair dryer, due to lack of experience, you can completely “kill” the most expensive parts of the tablet: the sensor, the display matrix and the motherboard. Further repairs in this case will cost a pretty penny. It's easier to buy a new gadget.

The screen consists of three elements: protective glass, touchscreen, monitor matrix. To separate the touchscreen from the matrix, heat it around the edges with a hair dryer. Under the influence of temperature, the glue will melt, and further separation will not be difficult.

To separate the protective glass from the case, use a plastic card. Use it to snap off the latches that are on the front panel. If in the process some of them fail, in order to return the technique to its previous form, we will be helped by double-sided tape, or a few drops of glue.

Video disassembly by manufacturers

Chinese manufacturers

Samsung

Lenovo

Asus

Huawei

Sony

iPad

Conclusion

We have analyzed the main, most important stages of work when repairing Android tablets. If the device is broken, and you doubt your abilities, it is better to give the device to the workshop. Thus, you will receive a guarantee for repairs and save your nerves. At the very least, watch the video above.

Quite often, tablet owners need to open the back cover - clean the volume buttons or replace components. It is for solving such problems that this article will come in handy, in which we will figure out how to open the tablet cover on our own.

The disassembly process does not differ much, and in some cases does not differ at all. Therefore, we will consider the general algorithm of actions and pay attention to some of the nuances.

Preliminary preparation

Before you begin, you must turn off the tablet and remove all SIM cards and USB drives from it. If this is not done, the cover may not be removed or the cards or attachments may be broken. - we will climb inside the device and excess dust, and even more dirt, we do not need it there.

We will need screwdrivers (most likely Phillips) and a plastic card (which is not a pity).

Parsing the algorithm

In the most general case, we simply find a place where we can insert a plastic card. Usually this place is near the volume buttons. We need to carefully, prying off the edge, disconnect the front and back of the tablet, splitting the fasteners. Sometimes a pick can be used instead of a card.

But you need to be very careful - in many models, manufacturers love to hide bolt fasteners. Before starting work, be sure to make sure that there are none. You need to apply moderate force. If the latch does not give in in any way, check additionally if there are any fasteners in this place. Sometimes they can be disguised as stickers or under places that mimic part of the touchpad.

It doesn't matter which manufacturer your tablet is from - Asus, Samsung, Lenovo or Prestigio - in all cases, the algorithm of actions will be the same.

After you managed to walk around the entire perimeter, do not rush to pull back the lid. First make sure that there are no cables going to it, if there are any - disconnect them if necessary.

The tablet is open, and we can start the work we need - replacing the battery or any other parts, cleaning the device from dust.

Conclusion

Very often, an ordinary user is simply afraid to touch the hardware, which is correct in many cases, but not always. How to open the back cover of the tablet - we figured it out, there is nothing complicated about it. The main thing is to be careful and act very carefully so as not to damage the filling. Basically, the lid is opened to

Video: Removing the Cover and Easy Disassembly of the Samsung Galaxy Tab 3

Often there are reasons why you need to disassemble your equipment. Most often, this procedure is carried out for internal cleaning. After it, your equipment starts to work more properly and faster, and the problems that previously drove you crazy disappear.

The procedure for disassembling the tablet can be carried out at home if you take full responsibility for the consequences. Some service centers will not undertake to repair your tablet even under warranty after you have taken it apart. This is worth considering, and if you doubt your abilities, it is better to contact a Samsung tablet repair service center.

Most often, when we need to disassemble the tablet, we are faced with the most ridiculous problems. The very first step is usually to remove the tablet cover. Yes, you heard right, removing the cover is also not always easy. Difficulties with opening the lid are also found on Apple tablets. The cover of the Samsung Galaxy Tab 3 tablet is also quite tightly and firmly attached to the body, and many are wondering how to remove it without damaging it.

Disassembling the Samsung Galaxy Tab 3

You will need a thin plastic object (such as a spatula) to remove the lid. Pull out the plug for the SIM card and, prying the back cover with a spatula, carefully around the entire perimeter, remove it.

If you only needed to remove the cover, you won't need further instructions. However, if you need to completely disassemble your tablet, go ahead.

After removing the back cover, you can remove the remaining parts. Let's start with the battery. For this we need a screwdriver. With it, we need to unscrew 4 screws along the edges of the battery. But that's not all. You also need to disconnect the battery from the motherboard. To do this, take the tweezers and carefully disconnect the cable. Done, the battery can be removed.

Next, you can remove the motherboard. Again, take the tweezers and disconnect the cables. If tweezers are not at hand, you can take a screwdriver. She will fit too. Now the panel will clearly show the screws on the sides. They need to be unlocked. There should be only 7 of these screws. The board can be removed.

Now you need to remove the rear camera. This procedure is no different from the ones mentioned above. We also snap off the cables to which the camera is attached, and take it out. The front camera is filmed a little differently than the rear. In order to remove it, you need to snap off the plug.

Ready! Your tablet is disassembled. Now it can be cleaned and reassembled in the same sequence. The procedure for disassembling a Samsung Galaxy Tab 3 tablet is not considered difficult, but if you doubt your abilities, it is better to contact a service center.

Good luck with your use!